PRODUCT OVERVIEW:
Serving as an electrically actuated flow-control component in cooling and fluid circuits, the Heatcraft 29318018 solenoid valve manages line isolation across a 3/8" connection. The unit responds to incoming electrical control signals to change its internal passage alignment, enabling automated line opening and closing sequences without manual intervention. Built to support multi-voltage electrical configurations, the assembly operates across 120V, 208V, or 240 VAC inputs at 50/60Hz, providing automated fluid regulation within compatible equipment.
ELECTROMAGNETIC ACTUATION OPERATION:
When electrical power reaches the solenoid winding, an electromagnetic field develops within the actuator assembly. The resulting magnetic force moves the internal plunger and transfers motion to the valve mechanism. This movement changes the valve position according to the connected control circuit.
REFRIGERATION SYSTEM LINE AUTOMATION:
Within a piping circuit, this solenoid valve functions as an automated inline fluid gate. Operating on standard AC control circuits, the component activates or deactivates based on electrical commands from system controllers, microprocessors, or thermostats. By governing fluid movement through the line during active and off-cycles, the valve facilitates automated system operation, scheduled fluid feed cycles, and positive line isolation during system shutdown.
REPLACEMENT GUIDELINES:
Replacement of the solenoid valve is necessary when electrical coil failure, seat surface wear, or mechanical plunger binding prevents complete opening or tight fluid shutoff. Exposure to continuous electrical cycling, thermal variation, or system contaminants can lead to coil continuity loss or internal seat weeping over time. Replacing the Heatcraft 29318018 solenoid valve restores proper line actuation and maintains positive fluid isolation.
Common Failure Symptoms:
- Valve does not open or permit fluid flow when operating voltages are applied.
- Fluid continues to leak or flow past the valve seat while the solenoid coil is de-energized.
- Absence of an audible mechanical click sound when control power is supplied to the coil.
- Total loss of electrical continuity across the coil winding terminals during testing.
- Buzzing or humming noises originating from the electrical coil during operation without valve movement.
EQUIPMENT COMPATIBILITY:
The Heatcraft 29318018 3/8" Solenoid Valve 50/60Hz 120/208/240 VAC applies to specific refrigeration and HVAC system models produced by the manufacturer. Before purchasing, verify that the replacement part matches the exact attributes listed in the Technical Specifications table, including the brand, part number, product type, port size, electrical frequency, and operating voltage.
Technical Specifications:
Product identification:
Brand: Heatcraft Refrigeration
Part Number: 29318018
Product Type: Solenoid Valve
Physical specifications:
Port Size: 3/8"
Electrical specifications:
Frequency: 50/60Hz
Voltage: 120/208/240 VAC
Installation Steps
Step 1: Turn off all power and isolate the system before starting.
Step 2: Ensure the pipe or tubing is depressurized and drained.
Step 3: Remove the old valve and clean the connection points.
Step 4: Install the new valve, aligning flow direction and tightening fittings securely.
Step 5: Connect electrical wiring according to voltage specifications.
Step 6: Restore power and test for proper operation and leaks.
Loyalty Program



