Nidec-Embraco EMI70UER1 1/5HP Compressor R290 115V 1-Phase
Specifications
- Weight:17.43 Lbs
- Cooling Capacity: 550 to 850 BTU/h
- Refrigerant: R290
- Oil Type: POE
- Voltage: 115V
- Phase: Single Phase
- Horsepower(HP): 1/5 HP
- Frequency: 60 Hz
Loyalty ProgramRefrigeration appliances rely on compressors to circulate refrigerant and support the heat-removal process required for cooling. The Nidec-Embraco EMI70UER1 is a 1/5 HP compressor specified for refrigeration systems using R290 refrigerant. It raises refrigerant vapor pressure within the refrigeration circuit, supporting refrigerant circulation and the appliance's cooling operation.
COMPRESSOR OPERATION AND ELECTRICAL CONFIGURATION:
A refrigeration compressor receives refrigerant vapor and increases its pressure before discharging it into the refrigeration circuit. This pressure increase enables the refrigerant to continue through the subsequent stages of the cooling cycle. The compressor's motor provides the mechanical power required to maintain this process during operation.
ELECTRICAL AND MOTOR CHARACTERISTICS:
The EMI70UER1 is rated for 115V, single-phase electrical operation and has a stated motor rating of 1/5 HP. Voltage and phase identify the required electrical supply configuration, while horsepower indicates the motor's rated power class. These characteristics should be checked against the original equipment requirements when selecting a replacement.
REFRIGERANT REQUIREMENTS AND R290 SAFETY:
This compressor is specified for R290 refrigerant, also known as propane. R290 is a flammable refrigerant and requires equipment specifically designed and approved for its use. The refrigeration system's refrigerant specification, servicing procedures, and applicable safety requirements must be confirmed before installation.
REPLACEMENT GUIDELINES:
Replacement may be necessary when testing confirms a compressor fault or the equipment's service documentation identifies the compressor for replacement. Before ordering, compare the existing compressor's part number with EMI70UER1 and confirm the required refrigerant, electrical supply, and compressor specifications.
COMMON FAILURE SYMPTOMS:
EQUIPMENT COMPATIBILITY:
The Nidec-Embraco EMI70UER1 is specified for refrigeration applications using R290 refrigerant and a 115V, single-phase electrical supply. These specifications alone do not establish compatibility with every R290 refrigeration appliance. Before ordering, verify the complete equipment model, original compressor part number, and manufacturer-approved compressor requirements.
TECHNICAL SPECIFICATIONS:
Part Identification:
Brand: Nidec-Embraco
Part Number: EMI70UER1
Product Type: Compressor
Electrical Specifications:
Voltage: 115V
Phase: 1-Phase
Mechanical Specifications:
Horsepower: 1/5HP
Refrigeration Specifications:
Refrigerant: R290
Step 1: Disconnect power and recover refrigerant safely using approved equipment.
Step 2: Remove old compressor and inspect system lines and filters.
Step 3: Mount new compressor securely and braze suction/discharge lines with nitrogen purge.
Step 4: Vacuum system check for leaks and ensure compatible components.
Step 5: Charge correct refrigerant amount, restore power, and monitor operation follow gas safety.