Product Overview:
Within the fuel-delivery assembly of applicable HVAC equipment, a gas valve serves as a control component for managing the availability of gas during equipment operation. The Bosch Hvac 8738715048 Tankless Natural Gas Valve RTGK199N1 provides this valve function within compatible equipment. As part of the HVAC Controls & Electrical category, it serves a control role within the appliance's gas-delivery system and supports combustion-related operation.
Gas Valve Actuation:
Electrical control from the equipment initiates movement of the gas valve mechanism to establish the required fuel-flow condition. The valve responds to the operating command by changing the position of its internal passage within the gas-control assembly. This action coordinates valve response with the equipment's demand for fuel.
Fuel Delivery Coordination:
Fuel movement through the appliance is coordinated between the gas supply and the combustion system. The gas valve regulates the availability of gas along this route so the burner receives fuel according to the equipment's operating requirements. This positions the valve as an interface between fuel delivery and combustion control.
Replacement Guidelines:
Replacement may be appropriate when the gas valve no longer performs its intended fuel-control function or when the existing valve is identified for replacement during equipment service. The replacement component should match 8738715048 and the applicable equipment requirements.
Common Failure Symptoms:
- Equipment fails to operate when gas delivery is required
- Interrupted heating operation associated with fuel delivery
- Inconsistent equipment operation during a heating cycle
- Failure of the combustion system to receive gas as required
Equipment Compatibility:
The Bosch HVAC 8738715048 Tankless Natural Gas Valve should be matched to equipment requiring this specific part number. Before purchasing, verify the equipment model and existing gas valve part number.
Technical Specifications:
Brand: Bosch
Part Number: 8738715048
Product Type: Gas Valve
Installation Steps
Step 1: Turn off power and shut off the gas supply to the HVAC system for safety.
Step 2: Remove the access panel to reach the existing gas valve.
Step 3: Disconnect gas lines and wiring from the old valve, noting positions.
Step 4: Unscrew and carefully remove the old gas valve.
Step 5: Install the new gas valve in the same orientation and secure it with screws.
Step 6: Reconnect gas lines and wiring, replace the panel, restore power and gas, and test operation.
Loyalty Program



