NTI Boiler 6008320401 Gas Valve CVI Kit
Specifications
- Type: Gas Valve CVI Kit
Loyalty ProgramProduct Overview:
As an essential fuel-metering component within high-efficiency boiler systems, a gas valve assembly controls fuel admission to support controlled combustion. The NTI Boiler 6008320401 Gas Valve CVI Kit manages gas distribution through the fuel supply path and toward the air-fuel mixing assembly. By combining electromechanical valve actuation with internal pressure regulation, the assembly supports controlled burner ignition and stable heating operation during active calls for heat.
Solenoid Actuation:
Uses an electrically controlled solenoid mechanism to operate the gas valve in response to signals from the boiler's control system. The solenoid actuates the valve mechanism to permit or stop gas flow according to the equipment's operating sequence. This electromechanical response coordinates fuel delivery with the boiler's ignition and heating operation.
Safety Shut-Off:
Provides an electrically controlled shut-off point within the boiler's gas supply path. When the valve is de-energized according to the equipment's control sequence, gas flow is stopped. This controlled shut-off supports fuel management during standby, shutdown, and other operating conditions requiring gas delivery to cease.
Replacement Guidelines:
Replacing the Gas Valve CVI Kit is appropriate if the assembly is damaged, malfunctioning, excessively worn, or otherwise deteriorated. Verify the NTI Boiler part number 6008320401 and the complete boiler model number before replacement. Replace the kit if deterioration affects gas flow regulation, solenoid actuation, pressure control, fuel shut-off, or normal boiler operation.
Common Signs of Wear:
Equipment Compatibility:
The NTI Boiler 6008320401 Gas Valve CVI Kit is intended for equipment that specifies part number 6008320401. Verify the complete boiler model number and manufacturer's parts documentation before purchasing to help confirm the correct application.
Technical Specifications:
Brand: NTI Boiler
Part Number: 6008320401
Product Type: Gas Valve CVI Kit
Step 1: Turn off gas and electrical power, wait for system to cool.
Step 2: Shut gas isolation valve and relieve line pressure.
Step 3: Remove existing gas valve assembly carefully, noting wiring and piping connections.
Step 4: Install new kit, ensuring correct orientation and tight fittings.
Step 5: Reconnect wiring and gas lines; check all seals.
Step 6: Restore gas slowly and perform leak test with approved solution; then test ignition and operation.